I don't have any pics, but I've been working on the steering column mount the past few days. I'm using an idea I saw in Street Rodder during their T-Bucket build they did last year. The column I'm using is out of a late model GM 3/4 ton pickup. The bottom of the tube is about 2" in outside diameter. So, I went to the local Home Depot and got some 2" ID PVC pipe.
This weekend I'll glass this pipe into position from the angled part of the toe board out through the bottom of the firewall. I'll cut the pipe on an angle flat with the firewall, and glass it in on both sides.
I'll post pics as soon as I have some....
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment